TRIBO.dsp U3400

Automatic offset/drift tracking eliminates the need for periodic manual drift or zero adjustment. Auburn’s industry leading technology also provides an automatic probe contamination check standard on all TRIBO.dsp units. The U3400 indicates when a battery or bridging effect is detected (i.e. moisture or particulate matter accumulates on the probe). The U3400 is simple to install and requires no set-up or sensitivity adjustments. Created by the originators of electrostatic/triboelectric particulate monitoring technology, Auburn’s U3400 is one of the most reliable, sensitive, easy to use particulate emissions and flow monitoring system available today.
The U3400 is wired directly to PLC’s, data loggers, or any control device capable of simultaneously providing 24V loop power while receiving the continuous 4-20 mA signal, such as TRIBO.prevent, a dual-level alarm panel with local display. The TRIBO.dsp U3400 is often the most suitable and economical choice for large multiple point bag leak detection applications. It is easily installed and connected to PLC’s or data hubs for plant wide, data management purposes.

TRIBO.dsp U3400 Features:
• Two wire system, no line power required-minimal installation costs
• Continuous 4-20 mA Output
• User friendly set-up, log or linear modes easily selected
• Widest performance range available, use for flow or emissions applications
• No operator drift adjustment required - set and forget
• Automatic probe contamination check